REGOL IH Chrome is an induction hardened chrome plated piston rod shafting designed to exceed original equipment manufacture specifications for applications requiring extra strength, toughness and hardness.
Standard Diameters in Stock
| 1/2″ 5/8″ 11/16″ 3/4″ 7/8″ 1″ |
1-1/8″ 1-1/4″ 1-3/8″ 1-1/2″ 1-5/8″ 1-3/4″ |
1-7/8″ 1-15/16″ 2″ 2-1/8″ 2-1/4″ 2-3/8″ |
2-1/2″ 2-5/8″ 2-3/4″ 2-15/16″ 3″ 3-1/4″ |
3-1/2″ 3-3/4″ 4″ 4-1/4″ 4-1/2″ 4-3/4″ |
5″ 5-1/2″ 5-3/4″ 6″ 7″ 8″ |
Metric Diameters in Stock
| 16mm (.630″) 17mm (.669″) 18mm (.709″) 20mm (.787″) |
22mm (.866″) 25mm (.984″) 28mm (1.102″) 30mm (1.181″) |
32mm (1.260″) 35mm (1.378″) 40mm (1.575″) 45mm (1.722″) |
50mm (1.989″) 55mm (2.165″) 60mm (2.362″) 65mm (2.559″) |
70mm (2.756″) 75mm (2.953″) 80mm (3.150″) 90mm (3.543″) |
Diameters not listed my be produced to your requirements
Chrome plating is .0005″ thick (.001″ on request)
Tolerances
| 1/2″ to 1-1/2″ 1-5/8″ to 2-3/8″ 2-1/2″ to 3″ |
.000 to -.0015 .000 to -.0020 .000 to -.0025 |
3-1/4″ to 4″ 4-1/4″ to 6″ 6″ to 10″ |
.000 to -.0035 .000 to -.0050 .000 to -.0070 |
Yield Strength: 100,000 PSI Min. Surface Hardness: 50 Rc Min
REGOL HARD CHROME SPECIAL
REGOL HC Special is produced from REGOL Turned Ground and Polished Heat Treated Alloy in limited sizes.
Added Benefits of REGOL Hard Chrome Special
Tensile Strength: 166,000 PSI
Core Hardness: 28 – 32 Rockwell C
Yield Strength: 90,000 or 150,000 PSI
Surface Hardness: 50 Rc min.