|
REGOL IH Chrome |
|||||
| REGOL
IH Chrome
is an induction hardened chrome plated piston rod shafting designed
to exceed original equipment manufacture specifications for applications
requiring extra strength, toughness and hardness. |
|||||
| Standard Diameters in Stock | |||||
1/2" 5/8" 11/16" 3/4" 7/8" 1" |
1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" |
1-7/8" 1-15/16" 2" 2-1/8" 2-1/4" 2-3/8" |
2-1/2" 2-5/8" 2-3/4" 2-15/16" 3" 3-1/4" |
3-1/2" 3-3/4" 4" 4-1/4" 4-1/2" 4-3/4" |
5" 5-1/2" 5-3/4" 6" 7" 8" |
Metric Diameters in Stock |
||||
16mm (.630") 17mm (.669") 18mm (.709") 20mm (.787") |
22mm (.866") 25mm (.984") 28mm (1.102") 30mm (1.181") |
32mm (1.260") 35mm (1.378") 40mm (1.575") 45mm (1.722") |
50mm (1.989") 55mm (2.165") 60mm (2.362") 65mm (2.559") |
70mm (2.756") 75mm (2.953") 80mm (3.150") 90mm (3.543") |
| Diameters not listed my be produced to your requirements | ||||
|
Chrome plating is .0005" thick (.001" on request) |
|||
|
Tolerances
|
|||
| 1/2"
to 1-1/2" 1-5/8" to 2-3/8" 2-1/2" to 3" |
.000
to -.0015 .000 to -.0020 .000 to -.0025 |
3-1/4"
to 4" 4-1/4" to 6" 6" to 10" |
.000
to -.0035 .000 to -.0050 .000 to -.0070 |
| Yield Strength: 100,000 PSI Min. Surface Hardness: 50 Rc Min | |||
| REGOL HARD CHROME SPECIAL |
|||
| REGOL
HC Special is produced from REGOL Turned Ground and Polished Heat
Treated Alloy in limited sizes. |
|||
| Added Benefits of REGOL Hard Chrome Special | |||
|
Tensile
Strength: 166,000 PSI Core Hardness: 28 - 32 Rockwell C Yield Strength: 90,000 or 150,000 PSI Surface Hardness: 50 Rc min. |