| REGOL
400 Color Code Brown Abrasion Resistant Wear Plate |
||
|
REGOL
400 with its high hardness and toughness
and incorporating an |
||
| Tensile: | 224,000 PSI | |
| Yield: | 176,000 PSI | |
| Hardness: | 400 BHN | |
| Elongation: | 12% | |
| Burning: | REGOL 400 can be easily cut with natural gas or acetylene. No reheating is necessary after cutting. Normalizing is recommended if machining is close to torch cut edges. | |
| Welding: | Suggested welding rods are AWS E12015, E30816, E10015, E10016, E6015, E6016 or 7018 low hydrogen high tensile rod. Over 3/4" thick, preheating to 200/300 ºF is recommended but not required | |
|
Fabrication REGOL 400 requires 3-4 times greater pressure than mild steel plate in forming. Exercise caution in cold forming where there are small radii or square corners. |
||
advanced
alloy combination has been
engineered to offer the ultimate in abrasion shock and impact resistance. One
inch mild steel plate, in many applications, can be replaced with
one- half inch REGOL 400. Sustained abrasion will be
counteracted by REGOL 400's work hardening properties, and will
last 4 to 8 times longer than mild steel plate in most cases.